 |
 |
Table Cell |
Finishing Your Project (60)
| Featured Discussions |
|---|
Tip of the DayI needed to spray a small job last week and I don't have a seperate area to paint in. Usually I clean the shop and wait a day for the dust… Started by Ron DudelstonLatest Reply |
 Hope this worksI am a bit impatient. I sanded the areas with the runs down to bare wood. I just applied a light coat of danish oil and I hope the color bl… Started by Adam WelkerLatest Reply |
 A question about finishes and waterHi all, Before I lay me down to sleep i thought I would ask you all what you would finish a shaving brush with? This brush of course wo… Started by Charles NichollsLatest Reply |
| Discussions | Replies | Latest Activity |
|---|---|---|
Hope this worksI am a bit impatient. I sanded the areas with the runs down to bare wood. I just applied a light coat of danish oil and I hope the color bl… Started by Adam Welker |
10 |
yesterday Reply by Cliff |
Tip of the DayI needed to spray a small job last week and I don't have a seperate area to paint in. Usually I clean the shop and wait a day for the dust… Started by Ron Dudelston |
2 |
yesterday Reply by Cliff |
 Can you use Dye over stain to even out color?Since I stained all 5 of the large frames, but only got the colored topcoat on 3 of them that I now have to sand down to the bare wood, I w… Started by Allen Worsham |
3 |
Feb 10 Reply by John Moody |
 Temporary Spray BoothI though I would start this and see how you all handle setting up to spray finishes on your projects. I have a two car garage, 24 x 32 that… Started by John Moody |
3 |
Feb 10 Reply by John Morris |
Time to try DyeI have been working on these frames for church made out of Beech and the finishing process has been frustrating. Even with a doing a couple… Started by Allen Worsham |
3 |
Feb 9 Reply by Gene Howe |
HVLP Spray gun problemsWell today I got started spraying some Shellac on the Cedar Chest. But boy was it a challenge. I have taken the spray gun apart at least fi… Started by John Moody |
10 |
Feb 6 Reply by John Moody |
Need some tips using Varathane stainI hope to finish up all the sanding today on the 10 large frames that I am making for church and put the stain on them. The material is Bee… Started by Allen Worsham |
6 |
Feb 5 Reply by John Moody |
Waterlox runsI am putting the final coats of finish on an enormous king size headboard. The finish is a washcoat of dewaxed shellac (1 lb cut), two coat… Started by Adam Welker |
6 |
Jan 26 Reply by John Morris |
 Mineral oil and bees wax finishJust wondering if anyone has used this? Greg http://www.thesawdustfactory.net/ Started by Greg Aksdal |
8 |
Dec 9, 2011 Reply by Greg Aksdal |
 Interesting NewsletterNot sure if any of you get this newsletter- http://www.thefinishingstore.com/newsletter-118/?utm_source=TheFinishingStore.Com+%28New%29&a… Started by Lewis Kauffman |
3 |
Nov 29, 2011 Reply by John Moody |
Find Supplies at Woodcraft
Notices
Please read about the General Rules of our community.
Do you love our cause? Do you like our site? Please help us keep our site live with your donations. It's easy and simple. 5,10,15,20 dollars. All donations are welcome! Please go to Support The Patriot Woodworker.
Please visit our Wounded Warriors Page on The Patriot Woodworker
The Wounded Warriors
The Patriot Woodworkers Links
TPW's Site Links
TPW's Favorite Links
Homes For Our Troops Face Book Page
Rob Cosman-Your Hand Tool Coach
Scroll Saw Videos by Karl Taylor
Wounded Warrior Face Book Page
Blogs You'll Love
Badge
Blog Posts
ShopNotes Router Lift Pt. 3- Putting It All Together
Posted by Lewis Kauffman on February 18, 2012 at 10:40am 0 Comments 0 Likes
ShopNotes Router Lift Pt. 2- Other Modifications
Posted by Lewis Kauffman on February 18, 2012 at 10:27am 0 Comments 0 Likes
ShopNotes Router Lift Pt. 1- The Problem
Posted by Lewis Kauffman on February 18, 2012 at 10:05am 0 Comments 0 Likes
Scroll saws 103 completing a simple project
Posted by Greg Aksdal on February 13, 2012 at 5:24pm 3 Comments 3 Likes
Building The Thickness Sander- In Operation And A Bit Of Reflecting
Posted by Lewis Kauffman on January 23, 2012 at 3:08pm 0 Comments 0 Likes
scroll saws 102 a discussion on blades.
Posted by Greg Aksdal on January 21, 2012 at 4:30pm 1 Comment 3 Likes
Scroll saws 101 A guide to key features of saws to help in choosing one.
Posted by Greg Aksdal on January 21, 2012 at 1:32pm 4 Comments 3 Likes
Building The Thickness Sander- Collecting The Dust
Posted by Lewis Kauffman on January 19, 2012 at 9:13pm 0 Comments 0 Likes
Building The Thickness Sander- Some Modifications And Additions
Posted by Lewis Kauffman on January 19, 2012 at 9:07pm 0 Comments 0 Likes
Building The Thickness Sander- Adding The Sandpaper
Posted by Lewis Kauffman on January 19, 2012 at 8:59pm 0 Comments 0 Likes
© 2012 Created by John Morris.
