Replies to This Discussion

Master CarpenterPermalink Reply by Allen Worsham on February 17, 2012 at 11:23am

I will tell you is "NOT" on my workbench and that is the 5 large (43"x43"x1") frames that I made for church!

I got the last coat of finish sprayed on them on Wednesday and delivered them today along with the mounting hardware. They will be hanging those on Monday.

I still have to finish up the 5 smaller (36"x26") frames to spray the top coat on, but I had to get the large frames out first. They already have the seal coat of shellac on them and just need a light sand and then spray the polycrylic.

 

---

Allen Worsham
Corona, CA

allenworsham@earthlink.net

http://www.awcreationsandwoodcrafts.com

'Graze in every man's field, but always give your own milk' J. Vernon McGee

• ▶ Reply

JourneymanPermalink Reply by Cliff on February 17, 2012 at 2:10pm

Friday nite is date nite:

I'm making Sashimi

• ▶ Reply

Master CarpenterPermalink Reply by Wayne Mahler on February 17, 2012 at 3:32pm

6 more Crosses and Hearts, Saturday morning is Bible study, the rest of the day is going to Monster Trucks with 2 of my grandsons. Sunday maybe I'll do my taxes.

---

Wayne Mahler
God bless and protect our troops that serve so we can be free.

• ▶ Reply

Site HostPermalink Reply by Charles Nicholls on February 17, 2012 at 4:39pm

Hi John, Well I can't do anything for a valentine I don't have but that's ok, it just means that more money is spent on me and the cat lol. As for what i am doing this weekend, i will be finishing up a bowl that Susie sent my way, Thank you Susie for that. If I still have time after that, i will be making a few pens and  maybe work on an idea that I came up with for a round picture frame out of Birdseye maple

The Bowl- Maple I believe, correct me if I am wrong Susie.

The Picture Frame (if i figure out how to put removable plexiglass in it. Any ideas on that are appreciated)

I was going to make pen blanks out of this, thus the horizontal lines but decided not to. If it doesn't work as a picture frame it will wind up as a small bowl. This piece is about 4"x1"

Thanks for reading. have a great weekend.

---

Charles
nicholls61@att.net
http://www.nichollswoodworks.com
This website is new so it doesn't have much to it yet but you are welcome to take a look :)

• ▶ Reply

Master CarpenterPermalink Reply by SQ on February 18, 2012 at 7:42am

I have to make up a Chevy truck business card holder. Customer wants it delivered on Tuesday.  I want to finish the maple laminated bowl I have on the lathe which has the 1/4 inch walnut between the bowl layers.  It just needs some more sanding so plan to work on that first.   Need to get some more bowls cut out and glued up so I can turn them. 

Yippee it's the weekend!!!!

SQ

---

Happiness is wood chips flying!

• ▶ Reply

Site HostPermalink Reply by Charles Nicholls on February 18, 2012 at 8:07am

Just got a order for a Slimline pen in Cocobolo, so the bowl is now on hold until that is made.

• ▶ Reply

Forum HostPermalink Reply by Lewis Kauffman on February 18, 2012 at 9:17am

Story of my life! Day late and a dollar short!

Cliff R said:

Friday nite is date nite:

I'm making Sashimi

---

Lew-
Time traveler. Purveyor of the world's finest custom rolling pins!

• ▶ Reply

Forum HostPermalink Reply by Lewis Kauffman on February 18, 2012 at 9:20am

Finished the router lift and now it's on to the Challenge Coin Holders and a podium for my brother-in-law's church. Rolling pin blanks are waiting to be turned, too.

---

Lew-
Time traveler. Purveyor of the world's finest custom rolling pins!

• ▶ Reply

Site HostPermalink Reply by Ron Dudelston on February 18, 2012 at 10:36am

Orders are a good thing Charles.  Congrats!

---

Ron Dudelston
Above and Beyond WoodWorks

• ▶ Reply

Site HostPermalink Reply by Charles Nicholls on February 18, 2012 at 10:39am

Thanks Ron

---

Charles
nicholls61@att.net
http://www.nichollswoodworks.com
This website is new so it doesn't have much to it yet but you are welcome to take a look :)

• ▶ Reply

Site AdminPermalink Reply by John Moody on February 18, 2012 at 7:03pm

A busy bunch. Glad to hear you all have things to work on in the shop.

I spend the day turning up my table saw. After I changed the belts I forgot to align the table top to the blade so before I could get started this morning on any projects I got into the turning. Got the miter slots aligned with the blade and the fence adjusted to the slots. Stop and picked up a new freud blade today so the saw was finally ready to go. I got one cutting board glued up today and three more cut out, planed and ready to glue and clamp. I didn't get as far as I wanted but I am happy with the table saw tune up. It really cut good today. I think it has been needing all of this attention.

Stopped by my wood warehouse and picked up a nice piece of Cherry to make some coin displays with so maybe I can but those out tomorrow afternoon. I also picked up a cherry board to cut the rings out for a board bowl. I am really wanting to get that cut tomorrow. Who knows.

---

John Moody
John Moody Woodworks
http://www.johnmoodywoodworks.com

• ▶ Reply

Master CarpenterPermalink Reply by Wayne Mahler on February 18, 2012 at 10:47pm

John

Thanks for the reminder about maintenance which is so very important. The better we care for our machines the better the give us what we seek,

---

Wayne Mahler
God bless and protect our troops that serve so we can be free.

• ▶ Reply

▶ Reply to Discussion

• ‹ Previous
• 1
• 2
• Next ›
• Page