Replies to This Discussion

JourneymanPermalink Reply by Cliff on February 21, 2012 at 4:30pm

That's cute.  Where'd ya get it?

Want a piece of Siberian Elm? 

• ▶ Reply

Site HostPermalink Reply by Charles Nicholls on February 21, 2012 at 4:39pm

Hi Cliff, I got it at Penn State Industries, here's the link to it  http://www.pennstateind.com/store/PKGRIND-4.html

it's on sale at the moment for a slightly lower price. Some have reported making as much as 5x what they put into making the grinder at craft shows.

---

Charles
nicholls61@att.net
http://www.nichollswoodworks.com
This website is new so it doesn't have much to it yet but you are welcome to take a look :)

• ▶ Reply

Site HostPermalink Reply by Ron Dudelston on February 21, 2012 at 6:51pm

Do you have a preference?

 

---

Ron Dudelston
Above and Beyond WoodWorks

• ▶ Reply

Site HostPermalink Reply by Charles Nicholls on February 21, 2012 at 6:57pm

Something good looking that will hold up to wood screws and not strip out, there are 2 small ones in the kit. Other than that no real preference.

Ron Dudelston said:

Do you have a preference?

 

---

Ron Dudelston
Above and Beyond WoodWorks

---

Charles
nicholls61@att.net
http://www.nichollswoodworks.com
This website is new so it doesn't have much to it yet but you are welcome to take a look :)

• ▶ Reply

Forum HostPermalink Reply by Lewis Kauffman on February 21, 2012 at 8:54pm

I checked my lumber rack- don't have anything that thick. Could glue up some stuff.

---

Lew-
Time traveler. Purveyor of the world's finest custom rolling pins!

• ▶ Reply

Site HostPermalink Reply by Charles Nicholls on February 21, 2012 at 9:05pm

I was sitting here a little while ago thinking that very thing. I will see what I have that is big enough and try that

Lewis Kauffman said:

I checked my lumber rack- don't have anything that thick. Could glue up some stuff.

---

Lew-
Time traveler. Purveyor of the world's finest custom rolling pins!

---

Charles
nicholls61@att.net
http://www.nichollswoodworks.com
This website is new so it doesn't have much to it yet but you are welcome to take a look :)

• ▶ Reply

CarpenterPermalink Reply by Arlin Eastman on February 22, 2012 at 2:05pm

Cliff

Siberian Elm is a wonderful wood to turn into vases, bowls, and platters.  Do you know where I can get a Tree

 

Arlin

 

• ▶ Reply

JourneymanPermalink Reply by Cliff on February 22, 2012 at 2:33pm

Do you know where I can get a Tree

I cut 5   of them down recently, had to be better than 100 years old

I got the best parts of them  in my shop.  One more to go. 

The wood seasons up quickly and resists checking. I've seasoned whole logs no problem

• ▶ Reply

Site HostPermalink Reply by Charles Nicholls on February 22, 2012 at 2:40pm

Send some of that my way LOL j/k

---

Charles Nicholls
Site Host
nicholls61@att.net
http://www.nichollswoodworks.com
This website is new so it doesn't have much to it yet but you are welcome to take a look :)

• ▶ Reply

▶ Reply to Discussion